Box Trailer with racks 750kg unbraked, ideal for laser 1, Rs Tera, oppie, topper, pico, Hartley 10, fusion and many more


Box Trailer with racks 750kg unbraked, ideal for laser 1, Rs Tera, oppie, topper, pico, Hartley 10, fusion and many more
Part Code:  
£1040.20 (Each)
ex VAT
Download PDF  
Download Spec Sheet
PDF Format (0.23Mb)


Trailer shown with 13" spare wheel and fitting and steel cover - available only as optional extra's. The rig tubes are available as an optional extra (see below).
Dimension of box are 1820mm * 1220mm or 6*4 feet
Diagonal measure across box is 2200mm
Height gap between racks is 475mm

We have rationalised the range of trailers that we now make. We now encourage people to buy either;

Double Laser trailer (which has the wide racks) or

Double Topper trailer (which is the same trailer as the Laser trailer, but with the extra cross members)

The Topper trailer is based on the laser trailer, with the same geometry of racks, the main difference is that it has the optional extra cross bars. These allow the Topper to be supported just behind the rear of the foredeck, when it is upside down. This is the strongest part of the boat and hence why we recommend supporting it in this area. The launch trolleys can either slide in the rack and sit on top of the upturned hull, or if they are collapsible trolleys they can go in the box


We have in the past made and supplied a trailer that was designed to carry two optimists, which had a narrow frame and did not have the drawbar extension. Most people found that as their children got older, they progressed into Toppers or Lasers, and were forced to change the trailer. The same applied to the old design of Topper trailer which used to be a narrow frame. Again, when people wanted to upgrade and transport Lasers, the frame was too narrow, and they used to have to buy a new rack. Both these models have now been dropped. The most popular trailers we have manufactured in this range have been the double Laser trailer and the Double Topper trailer, and both models have excellent residual values when people come to resell them


If you have Rs feva or Qba  boats you will need a deeper rack which has a 600m gap rather than the usual 475mm gap this is available to order in double and triple format


We used to manufacture a 10 inch version (rated at 500kg )and a 13 version ( rated at 750kg). The 13 inch wheel version accounted for about 97% of all sales, as it gave a much better quality ride. So we dropped the 10 inch wheel version. The 13 inch wheel versions also held their prices a lot better.



With all models it is possible to remove the racks from the trailer and use the rack as a self-supporting rack to store the boats on. This enables the trailer to be used as a conventional trailer.

Product Accessories:

Product   Price Qty  


Your cart is Empty

Register with Mersea Trailers
Contact Mersea Trailers
Second Hand Trailers and Stock Clearance
Bramer Dealers Page
Rapide dealer page
mersea dealer page
Terms & Conditions | Privacy Policy | SiteMap
© 2019 Copyright Mersea Trailers. All Rights Reserved
Valid XHTML 1.0 Transitional  Valid CSS!
Payments by WorldPay
Mersea Trailers Group, including Rapide Trailers, Snipe Trailers and Bramber Trailers
Tel: 01206 255 276 Email:
Powered by Solweb
We use Google Analytics to help improve the quality of the services we offer, will you accept our cookies? Read our cookie policy here
accept   decline